Software Features - Huawei Quidway S5600 Series Operation Manual

Operation Manual – Overview
Quidway S5600 Series Ethernet Switches-Release 1510
An S5600 series switch provides one 2-port Fabric interface and one expansion
module slot on its rear panel. The available expansion modules you can select include:
8-port 1000 Mbps SFP module, 1-port 10G XENPAK module and 2-port 10G XFP
module.

3.3 Software Features

The S5600 series have abundant software features and can meet the requirements of
different applications. Table 3-2 summarizes the features provided by each module.
Table 3-2
Part
1 CLI
2 Login
3 Configuration
File Management
4 VLAN
5 IP Address and
Performance
Configuration
6 Management
VLAN
7 Voice VLAN
8 GVRP
9 Port
Configuration
10
Aggregation
11 Port Isolation
12
Security&Port
Binding
Service features of the S5600 series
CLI
Hierarchically grouped commands
CLI online help
Logging into a switch through the Console port
Logging into a switch through an Ethernet port by using
Telnet or SSH
Logging into a switch through the Console port by using
modem
Logging into a switch through Web or NMS
Saving, restoring, and deleting the configuration file
IEEE 802.1Q-compliant VLAN
Port-based VLAN
Protocol-based VLAN
Configuring an IP address for a switch
Configuring the TCP attributes for a switch
Management VLAN configuration
Management VLAN interface configuration
Voice VLAN
GARP VLAN registration protocol (GVRP)
Three port states supported: Access, Trunk, and Hybrid
Setting broadcast storm suppression globally
Basic
Loopback detection supported
Cable test
Link
Link aggregation control protocol (LACP)
Port isolation group
Port
Multiple security modes
MAC address-to-port binding
Huawei Technologies Proprietary
Features
3-2
Chapter 3 Product Overview