Checking The Configuration; Sending Information To The Information Center; Sending Information To The Console - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Device Management
The format of the timestamp is set for the debugging information.
Step 3 Run:
info-center timestamp { trap | log } { boot | none | { short-date | format-date |
date } [ precision-time { tenth-second | millisecond } ] }
The format of the timestamp is set for the output logs or traps information.
----End

6.2.6 Checking the Configuration

Run the following commands to check the previous configuration.
Action
Check the configuration of the
channel.
Check the information recorded by
the information center.
Check the information in the log
buffer of the memory.
Check the summary of the
information in the log buffer.
Check the information in the trap
buffer of the memory.

6.3 Sending Information to the Information Center

This section describes how to send information to the specified direction.

6.3.1 Sending Information to the Console

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center console channel { channel-number | channel-name }
Information is sent to the console.
Step 3 Run:
quit
Return to the user view.
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Monitoring the Device Through the Information Center
Command
display channel [ channel-number | channel-name ]
display info-center [ statistics ]
display logbuffer [ level severity | module module-
name | size value | slot slot-id ]
display logbuffer summary [ level severity | slot slot-
*
id ]
display trapbuffer [ size value ]
*
57