Huawei Quidway S5600 Series Operation Manual page 572

Operation Manual – AAA & RADIUS & HWTACACS & EAD
Quidway S5600 Series Ethernet Switches-Release 1510
Table 1-33 Display and maintain HWTACACS protocol information
Display the configuration
or statistic
about one specific or all
HWTACACS schemes
Display
stop-accounting request
packets
responded to
Clear the statistics about
the TACACS protocol
Delete
stop-accounting request
packets
responded to
1.7 AAA & RADIUS & HWTACACS Configuration Example
1.7.1 Remote RADIUS Authentication of Telnet/SSH Users
Note:
The configuration procedure for the remote authentication of SSH users through
RADIUS server is similar to that of Telnet users. The following description only takes
the remote authentication of Telnet users as example.
I. Network requirements
In the network environment shown in Figure 1-7, you are required to configure the
switch so that the Telnet users logging into the switch are authenticated by the RADIUS
server.
Operation
display
information
[
[ statistics] ]
display
stop-accounting-buffer
the buffered {
hwtacacs-scheme-name
that are not session-id
time-range
stop-time
user-name }
reset hwtacacs statistics
{
authentication
authorization | all }
reset
stop-accounting-buffer
the buffered {
hwtacacs-scheme-name
that are not session-id
time-range
stop-time
user-name }
Huawei Technologies Proprietary
Chapter 1 AAA & RADIUS & HWTACACS
Command
hwtacacs
hwtacacs-scheme-name
hwtacacs-scheme
session-id
start-time
| user-name
accounting
hwtacacs-scheme
session-id
start-time
| user-name
1-42
Configuration
Description
You can execute the
display command in
any view
|
|
|
|
You can execute the
reset command
user view
|
|
in