Huawei Quidway S5600 Series Operation Manual page 47

Operation Manual – Login
Quidway S5600 Series Ethernet Switches-Release 1510
Operation
Set
command buffer size
Set the timeout time for
the user interface
Note that the command level available to users logging into a switch depends on both
the authentication-mode none command and the user privilege level level
command, as listed in the following table.
Table 2-5 Determine the command level (A)
Authentication
mode
None
(authentication-
mode none)
2.4.2 Configuration Example
I. Network requirements
Assume that you are a level 3 VTY user and want to perform the following configuration
for users logging in through the Console port:
Do not authenticate users logging in through the Console port.
Commands of level 2 are available to users logging into the AUX user interface.
The baud rate of the Console port is 19,200 bps.
The screen can contain up to 30 lines.
the history history-command
max-size value
idle-timeout minutes
[ seconds ]
Scenario
User type
Users
logging
through
Console
ports
Huawei Technologies Proprietary
Chapter 2 Logging in through the Console Port
Command
Optional
The default history command
buffer size is 10. That is, a
history command buffer can
store up to 10 commands by
default.
Optional
The default timeout time of a
user interface is 10 minutes.
With the timeout time being 10
minutes, the connection to a
user interface is terminated if
no operation is performed in
the user interface within 10
minutes.
You can use the idle-timeout 0
command
timeout function.
Command
The user privilege level
level command not executed
in
The user privilege level
level command
executed
2-7
Description
to disable the
Command
level
Level 3
Determined
already by the level
argument