Displaying Port Binding Configuration - Huawei Quidway S5600 Series Operation Manual

Operation Manual – Port Security & Port Binding
Quidway S5600 Series Ethernet Switches-Release 1510
Chapter 2 Port Binding Configuration
2.1 Introduction to Port Binding
2.1.1 Port Binding Overview
The network manager may bind the MAC addresses and IP addresses of legal user to
specific port through the port binding feature. After binding, only the packets with the
specified MAC addresses and IP addresses can be transferred through the port. This
greatly improves the security and manageability of the system.
2.1.2 Configuring Port Binding
Table 2-1 Configure port binding
Operation
Enter system view
Bind the legal MAC
addresses and IP
addresses
specific port
Enter Ethernet port
view
Bind the legal MAC
addresses and IP
addresses
current port
Note:
The system allows only one binding operation for the same MAC address.

2.2 Displaying Port Binding Configuration

After the above-mentioned configuration, you can use the display command in any
view to view the operating state with the port binding configured, so as to verify
configuration result.
Command
system-view
am user-bind
mac-address
ip-address
to
interface-type
interface-number
interface interface-type
interface-number
am user-bind
mac-address
to
ip-address
Huawei Technologies Proprietary
2-1
Chapter 2 Port Binding Configuration
Description
-
mac-addr
ip-addr
interface Optional
-
mac-addr
ip-addr Optional