Mirroring Configuration; Configuring Traffic Mirroring - Huawei Quidway S5600 Series Operation Manual

Operation Manual – Mirroring
Quidway S5600 Series Ethernet Switches-Release 1510
Function

1.3 Mirroring Configuration

For mirroring features, see section 1.1 "Overview".

1.3.1 Configuring Traffic Mirroring

I. Configuration prerequisites
ACLs for identifying traffics have been defined. For defining ACLs, see the
description on the ACL module in this manual.
The destination port has been defined.
The port on which to perform traffic mirroring configuration and the direction of
traffic mirroring has been determined.
II. Configuration procedure
Table 1-3 Configure traffic mirroring
Enter system view
Enter Ethernet port view of the
destination port
Define the current port as the
destination port
Exit current view
Enter Ethernet port view of
traffic mirroring configuration
Specifications
Supports port
mirroring
Supports remote
port mirroring
Operation
Huawei Technologies Proprietary
Chapter 1 Mirroring Configuration
Related command
mirroring-group
mirroring-group mirroring-port
mirroring-group monitor-port
monitor-port
mirroring-port
mirroring-group
mirroring-group mirroring-port
mirroring-group monitor-port
mirroring-group reflector-port
mirroring-group remote-probe
vlan
Command
system-view
interface interface-type
interface-number
monitor-port
quit
interface interface-type
interface-number
1-4
Link
Section 1.3.2
"Configuring
Port Mirroring"
Section 1.3.3
"Configuring
RSPAN"
Description
—
—
Required
LACP and TCP
cannot be enabled
on the destination
port.
—
—