Member Device Configuration - Huawei Quidway S5600 Series Operation Manual

Operation Manual – Cluster
Quidway S5600 Series Ethernet Switches-Release 1510
Operation
Enter cluster view
Configure
network
management (NM)
interface for the
cluster

1.3 Member Device Configuration

1.3.1 Member Device Configuration Tasks
Table 1-12 Member device configuration tasks
Operation
Enable
globally
specific ports
Enable
globally
specific ports
Configure member
devices to access
FTP/TFTP
of the cluster
1.3.2 Enabling NDP Globally and for Specific Ports
Table 1-13 Enable NDP globally and for specific ports
Enter system view
Enable NDP globally
Enable
NDP for
specified
ports
Command
cluster
the
nm-interface
Vlan-interface vlan-id
Description
NDP
and for Required
NTDP
and for Required
Required
server
Operation
In system view
Enter
Ethernet
In
port
Ethernet
view
port
Enable
view
NDP on
the port
Huawei Technologies Proprietary
Required
Optional
Section 1.3.2 Enabling NDP
Globally and for Specific Ports
Section 1.3.3 Enabling NTDP
Globally and for Specific Ports
Section
Member Devices to Access
FTP/TFTP
Cluster
Command
system-view
ndp enable
ndp enable interface
port-list
interface interface-type
interface-number
ndp enable
1-12
Chapter 1 Cluster
Description
Related section
1.3.4 Configure
Server of the
Description
—
Required
Required
You can choose to
enable NDP in system
view or in Ethernet port
view