Voice Vlan Configuration - Huawei Quidway S5600 Series Operation Manual

Operation Manual – Voice VLAN
Quidway S5600 Series Ethernet Switches-Release 1510
Caution:
If the voice stream transmitted by an IP voice device is with VLAN tag and the port
which the IP voice device is attached to is enabled with 802.1x authentication and
802.1x guest VLAN assign different VLAN IDs for the voice VLAN, the default VLAN
of the port, and the 802.1x guest VLAN to ensure the two functions to operate
properly.
If the voice stream transmitted by the IP voice device is without VLAN tag, the
default VLAN of the port which the IP voice device is attached can only be
configured as a voice VLAN for the voice VLAN function to take effect. In this case,
802.1x authentication is unavailable.

1.2 Voice VLAN Configuration

1.2.1 Configuration Prerequisites
Create the corresponding VLAN before configuring a voice VLAN.
VLAN 1 is the default VLAN and do not need to be created. But VLAN 1 does not
support the voice VLAN function.
1.2.2 Configuring a Voice VLAN to Operate in Automatic Mode
Table 1-3 Configure a voice VLAN to operate in automatic mode
Operation
Enter system view
Enter Ethernet port
view
Enable the voice
VLAN function for
the port
Set the voice VLAN
operation mode to
automatic mode
Quit to system view
Set
address that can
be identified by the
voice VLAN
system-view
interface
interface-number
voice vlan enable
voice vlan mode auto
quit
an OUI
voice vlan mac-address
oui
[ description text ]
Huawei Technologies Proprietary
Chapter 1 Voice VLAN Configuration
Command
interface-type
mask oui-mask
1-4
Description
—
Required
Required
By default, the voice VLAN
function is disabled.
Required
The default voice
operation mode is automatic
mode.
—
Optional
By default, the switch uses the
default OUI address
determine the voice stream.
VLAN
to