Timer And Maximum User Number Configuration - Huawei Quidway S5600 Series Operation Manual

Operation Manual – 802.1x
Quidway S5600 Series Ethernet Switches-Release 1510

1.4 Timer and Maximum User Number Configuration

Table 1-2 Configure 802.1x timers and the maximum number of users
Operation
Enter system view
Configure
maximum number
of
on-line users for
specified ports
Configure
maximum
times
request packets
Configure
timers
Trigger
quiet-period timer
Command
system-view
In system view:
dot1 x
the
user-number
inter face-list ]
concurrent
In port view:
dot1x
user-number
the
retry
dot1x retry max-retry-value
to send
dot1x
{
handshake-period-value
quiet-period
quiet-period-value
802.1x tx-period tx-period-value |
supp-timeout
supp-timeout-value
server-timeout
server-timeout-value
ver-period
ver-period-value }
the
dot1x quiet-period
Huawei Technologies Proprietary
max-user
[ interface
max-user
timer
handshake-period
|
|
|
|
1-15
Chapter 1 802.1x Configuration
Description
—
Optional
By default, up to
concurrent on-line users are
allowed on each port.
Optional
By default, the maximum retry
times to send a request
packet is 2. That is, the
authenticator system sends a
request packet to a supplicant
system for up to two times by
default.
Optional
The default values of 802.1x
timers are as follows:
handshake-period-value:
15 seconds
quiet-period-value:
seconds
tx-period-value:
seconds
supp-timeout-value:
seconds
server-timeout-value: 100
seconds
ver-period-value:
seconds
Optional
By default, a quiet-period
timer is disabled.
256
60
30
30
30