Huawei Quidway S5600 Series Operation Manual page 500

Hide thumbs Also See for Quidway S5600 Series:
Table of Contents

Advertisement

Operation Manual – Multicast Protocol
Quidway S5600 Series Ethernet Switches-Release 1510
II. Network diagram
S1
S1
Vlan-interface 200
Vlan-interface 200
10.110.2.1/8
10.110.2.1/8
Figure 8-5 Network diagram for Anycast RP configuration
III. Configuration procedure
1)
Configure interface IP addresses and unicast routing protocol on the switches.
In the PIM-SM domain, configure the interface IP addresses on the switches and
interconnect the switches through OSPF. Configure the IP address and mask of each
interface according to Figure 8-5. The details are omitted here.
2)
Enable multicast and configure PIM-SM.
# Enable multicast on SwitchC and enable PIM-SM on all interfaces. The configuration
procedures on other switches are similar to that on SwitchC. The details are omitted
here.
<SwitchC> system-view
[SwitchC] multicast routing-enable
[SwitchC] interface Vlan-interface 100
[SwitchC-Vlan-interface100] pim sm
[SwitchC-Vlan-interface100] quit
[SwitchC] interface Vlan-interface 200
[SwitchC-Vlan-interface200] pim sm
[SwitchC-Vlan-interface200] quit
[SwitchC] interface Vlan-interface 110
[SwitchC-Vlan-interface110] pim sm
[SwitchC-Vlan-interface110] quit
users
users
Vlan-interface 100
Vlan-interface 100
MSDP peer
MSDP peer
Vlan-interface 100
Vlan-interface 100
10.110.1.1/8
10.110.1.1/8
Vlan-interface 110
Vlan-interface 110
.
.
192.168.1.1/24
192.168.1.1/24
Loopback 10
Loopback 10
10.1.1.1/8
10.1.1.1/8
SwitchC
SwitchC
Vlan-interface 120
Vlan-interface 120
192.168.1.2/24
192.168.1.2/24
Loopback 0
Loopback 0
1.1.1.1/8
1.1.1.1/8
Huawei Technologies Proprietary
users
users
10.110.3.1/8
10.110.3.1/8
SwitchD
SwitchD
Loopback0
Loopback0
2.2.2.2/8
2.2.2.2/8
Loopback 10
Loopback 10
10.1.1.1/8
10.1.1.1/8
Vlan-interface 101
Vlan-interface 101
192.168.3.1/24
192.168.3.1/24
Vlan-interface 101
Vlan-interface 101
192.168.3.2/24
192.168.3.2/24
Vlan-interface 100
Vlan-interface 100
10.110.4.1/8
10.110.4.1/8
SwitchF
SwitchF
users
users
8-18
Chapter 8 MSDP Configuration
S2
S2
S3
S3
PIM-SM
PIM-SM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents