Huawei Quidway S5600 Series Operation Manual page 472

Operation Manual – Multicast Protocol
Quidway S5600 Series Ethernet Switches-Release 1510
Caution:
If you configure basic ACLs, the source address match is performed on all the
received multicast packets. The packets failing to match are discarded.
If you configure advanced ACLs, the source address and group address match is
performed on all the received multicast packets. The packets failing to match are
discarded.
7.4 PIM-SM Configuration
PIM-SM configuration includes:
Table 7-7 Configuration tasks
Configure filtering policies
for
sources/groups
Configure BSR/RP
Configure
domain boundary
Filter
packets from RP to DR
7.4.1 Configuring Filtering Policies for Multicast Source/Group
For the configuration of filtering policies for multicast source/group, refer to 7.3
PIM-DM Configuration.
7.4.2 Configuring BSR/RP
Table 7-8 Configure BSR/RP
Enter system view
Enable
routing protocol
Enter PIM view
Operation
multicast
Optional
Optional
PIM-SM
Optional
the registration
Optional
Operation
system-view
the multicast multicast
routing-enable
pim
Huawei Technologies Proprietary
Description
Section 7.4.1 Configuring Filtering
Policies for Multicast Source/Group
Section 7.4.2 Configuring BSR/RP
Section 7.4.3 Configuring PIM-SM
Domain Boundary
Section
Registration Packets from RP to DR
Command
7-14
Chapter 7 PIM Configuration
Section
7.4.4 Filtering
Description
—
Required
—
the