Huawei Quidway S5600 Series Operation Manual page 648

Operation Manual - DHCP
Quidway S5600 Series Ethernet Switches-Release 1510
Table 2-15 Configure to assign IP addresses dynamically
Operation
Enter system view
Configure
the lease
time
Specify
addresses that are not
dynamically assigned
Note:
The dhcp server forbidden-ip command can be executed repeatedly. That is, you
can repeatedly configure IP addresses that are not dynamically assigned to DHCP
clients.
Use the dhcp server forbidden-ip command to configure the IP addresses that
are not assigned dynamically in global address pools and interface address pools.
If an IP address that is not to be automatically assigned has been configured as a
statically-bound IP address, the DHCP server still assigns this IP address to the
client whose MAC address has been bound.
Command
system-view
interface
interface-number
Configure
for the dhcp server expired { day
current day [ hour hour [ minute
interface
minute ] ] | unlimited }
quit
dhcp server expired { day
Configure day [ hour hour [ minute
multiple minute ] ] | unlimited }
interfaces { interface interface-type
in system interface-number
view interface-type
interface-number ] | all }
the IP dhcp server forbidden-ip
low-ip-address
[ high-ip-address ]
Huawei Technologies Proprietary
2-18
Chapter 2 DHCP Server Configuration
—
interface-type
Optional
The default lease time is
one day
[ to
Optional
By
addresses
address pool are available
for
assigned.
Description
default, all IP
in a DHCP
being dynamically