Displaying Snmp - Huawei Quidway S5600 Series Operation Manual

Operation Manual – SNMP and RMON
Quidway S5600 Series Ethernet Switches-Release 1510
Note:
In the environment of a single device, use the display logbuffer command to view
the logging information for the get and set operations sent from NMS.
In the fabric environment, use the display logbuffer command on the master
device to view the logging information for the set operation. Use the display
logbuffer command on the device that has received the get message to view the
logging information for the get operation sent from NMS.

1.5 Displaying SNMP

After the above configuration is completed, execute the display command in any view
to view the running status of SNMP, and to verify the configuration.
Table 1-6 Display SNMP
Display system information of the
current SNMP device
Display
information
Display the engine ID of the current
device
Display group information about the
device
Display SNMP user information
Display Trap list information
Display
community name
Display the currently configured MIB
view
Operation
SNMP packet statistics
the currently configured
Huawei Technologies Proprietary
Command
display snmp-agent
sys-info [ contact |
location | version ]*
display snmp-agent
statistics
display snmp-agent
{ local-engineid
remote-engineid }
display snmp-agent
group [ group-name ]
display snmp-agent
usm-user [ engineid
engineid |
user-name
group-name ]
display snmp-agent
trap-list
display snmp-agent
community [ read |
write ]
display snmp-agent
mib-view [ exclude |
include |
view-name ]
1-8
Chapter 1 SNMP Configuration
Description
|
The display
command
can
username
executed in
| group
any view
viewname
be