Huawei Quidway S5600 Series Operation Manual page 732

Operation Manual - QoS&QoS Profile
Quidway S5600 Series Ethernet Switches
Note:
The redirect configuration is effective only for the ACL rules whose actions are
permit.
When packets are redirected to CPU, they cannot be forwarded normally.
If you set to redirect the traffic to a Combo port which is in down state, the system
automatically redirects the traffic to the up port which is corresponding to the Combo
port.
1.9.3 Configuration Example
GigabitEthernet1/0/1 of the switch is accessed into the 10.1.1.1/24 network
segment
Redirect
GigabitEthernet1/0/7
Configuration procedure:
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] acl number 2000
[Quidway-acl-basic-2000] rule permit source 10.1.1.1 0.0.0.255
[Quidway-acl-basic-2000] quit
[Quidway] interface GigabitEthernet1/0/1
[Quidway-GigabitEthernet1/0/1]
interface GigabitEthernet1/0/7
1.10 Configuring Queue-scheduling
Refer to 1.1.11 Queue Scheduling for the introduction to queue scheduling.
1.10.1 Configuration Prerequisites
The queue-scheduling algorithm is specified: which queues adopt the WRR
queue-scheduling algorithm and which queues adopt the SP queue-scheduling
algorithm
1.10.2 Configuration Procedure
Table 1-14 Configure queue scheduling in system view
Operation
Enter system view
all the traffic from
traffic-redirect
Command
system-view
Huawei Technologies Proprietary
1-20
Chapter 1 QoS Configuration
the 10.1.1.1/24 network
inbound
—
segment to
ip-group 2000
Description