Dhcp Security Configuration - Huawei Quidway S5600 Series Operation Manual

Operation Manual - DHCP
Quidway S5600 Series Ethernet Switches-Release 1510
Operation
2.3.8 Configure Connection Between the DHCP Interface Address Pool and
the BIMS Server
After configuring the connection between the DHCP interface address pool and the
BIMS server, you can enable the BIMS server to manage the devices that have
obtained IP addresses from the interface address pool.
Table 2-19 Configure connection between the DHCP interface address pool and the
BIMS server
Enter system view
Configure
between
interface
and the BIMS server

2.4 DHCP Security Configuration

DHCP security configuration is needed to ensure the security of DHCP service.
2.4.1 Prerequisites
Before configuring DHCP security, you should first complete the DHCP server
configuration (either global address pool-based or interface address pool-based
DHCP server configuration).
dhcp
Configure
ascii-string | hex hex-string&<1-10> |
multiple
ip-address
interfaces
{
in system
interface-number
view
interface-number ] | all }
Operation
system-view
dhcp server bims-server
ip
connection
port-number ] sharekey key
the DHCP
{ interface interface-type
address pool
interface-number
interface-type
interface-number ] | all }
Huawei Technologies Proprietary
Chapter 2 DHCP Server Configuration
Command
server option code
ip-address&<1-8>
interface interface-type
[ to interface-type
Command
ip-address [ port
[
2-22
Description
configured
{ ascii
}
Description
-
Required
By default,
connection between the
DHCP interface
to
address pool and the
BIMS server
configured
no
is