Huawei Quidway S5600 Series Operation Manual page 726

Operation Manual - QoS&QoS Profile
Quidway S5600 Series Ethernet Switches
Through the traffic-priority command. Then you can remark the IP precedence,
802.1p priority, DSCP priority and local precedence.
1.5.1 Configuration Prerequisites
ACL rules used for traffic identifying are defined. Refer to the ACL module in the
book for defining ACL rules
The type and value of the precedence that the packets matching with ACL rules
are remarked are determined
The ports which need this configuration are defined
1.5.2 Configuration Procedure
Table 1-8 Configure priority remark
Operation
Enter system view
Enter Ethernet port
view
Use ACL rules
traffic identifying and
specify
precedence for
packet matching with
the ACL rules
Display the parameter
configurations
priority remark
Display all the QoS
settings of the port
acl-rule: Applied ACL rules which can be the combination of various ACL rules. The
way of combination is described in the following table:
Table 1-9 Ways of issuing combined ACLs
Apply all the rules in an IP ACL
separately
Apply a rule in an IP ACL separately
Apply all the rules in a Link ACL
separately
system-view
interface
interface-number
traffic-priority
in
acl-rule { { dscp dscp-value
| ip-precedence { pre-value
a new
| from-cos } } | cos
the
{ pre-value | from-ipprec } |
local-precedence
pre-value }*
display
{
of
interface-number | unit-id }
traffic-priority
display
{
interface-number | unit-id }
all
ACL combination
Huawei Technologies Proprietary
Command
interface-type
inbound
qos-interface
interface-type
qos-interface
interface-type
Form of the acl-rule argument
ip-group acl-number
ip-group acl-number rule rule
link-group acl-number
1-14
Chapter 1 QoS Configuration
Description
—
—
Required
Optional
You can execute
display command in any
view
the