Displaying Port Isolation Configuration; Port Isolation Configuration Example - Huawei Quidway S5600 Series Operation Manual

Operation Manual - Port Isolation
Quidway S5600 Series Ethernet Switches-Release 1510

1.3 Displaying Port Isolation Configuration

After the above configuration, you can execute the display command in any view to
display the running state after port isolation configuration. You can verify the
configuration effect through checking the displayed information.
Table 1-2 Display port isolation configuration
Operation
Display the information
about the Ethernet ports
added to the isolation
group

1.4 Port Isolation Configuration Example

I. Network requirements
PC 2, PC 3 and PC 4 are connected to GigabitEthernet1/0/2, GigabitEthernet1/0/3,
and GigabitEthernet1/0/4 ports.
The switch connects to the Internet through GigabitEthernet1/0/1 port.
It is desired that PC 2, PC 3 and PC 4 cannot communicate with each other.
II. Network diagram
PC2 PC2 PC2 PC2
Figure 1-1 Network diagram for port isolation configuratio
display isolate port
Internet Internet Internet Internet
GE1/0/1 GE1/0/1
Switch Switch
GE1/0/2 GE1/0/2
GE1/0/3 GE1/0/3
PC3 PC3 PC3 PC3
Huawei Technologies Proprietary
1-2
Chapter 1 Port Isolation Configuration
Command
You
display command in any
view
GE1/ GE1/ 0/4 0/4
n
Description
can execute the
PC4 PC4 PC4 PC4