Voice Vlan Overview - Huawei Quidway S5600 Series Operation Manual

Operation Manual – Voice VLAN
Quidway S5600 Series Ethernet Switches-Release 1510
Chapter 1 Voice VLAN Configuration

1.1 Voice VLAN Overview

Voice VLANs are VLANs configured specially for voice data stream. By adding the
ports with voice devices attached to voice VLANs, you can perform QoS (quality of
service)-related configuration for voice data, ensuring the transmission priority of voice
data stream and voice quality.
S5600 series Ethernet switches determine whether a received packet is a voice packet
by checking its source MAC address. If the source MAC addresses of packets comply
with the organizationally unique identifier (OUI) addresses configured by the system,
the packets are determined as voice packets and transmitted in voice VLAN.
You can configure an OUI address for voice packets or specify to use the default OUI
address.
Note:
An OUI address is a globally unique identifier assigned to a vendor by IEEE. You can
determine which vendor a device belongs to according to the OUI address which forms
the first 24 bits of a MAC address.
The following table shows the five default OUI addresses of a switch.
Table 1-1 Default OUI addresses preset by the switch
Number
1
2
3
4
5
OUI Address
0003-6b00-0000
000f-e200-0000
00d0-1e00-0000
00e0-7500-0000
00e0-bb00-0000
Huawei Technologies Proprietary
Chapter 1 Voice VLAN Configuration
Cisco phone
H3C Aolynk phone
Pingtel phone
Polycom phone
3Com phone
1-1
Vendor