Displaying And Debugging Dhcp Client Configuration - Huawei Quidway S3000-EI Series Operation Manual

Operation Manual - Network Protocol
Quidway S3000-EI Series Ethernet Switches
Table 3-1 Configuring a VLAN interface to obtain IP address using DHCP
Configure VLAN interface to obtain IP
address using DHCP
Remove the configuration
By default, the VLAN interface does not obtain IP address using DHCP.

3.3 Displaying and Debugging DHCP Client Configuration

After the above configuration, execute display command in any view to display the
running of the DHCP Client configuration, and to verify the effect of the configuration.
Execute debugging command in user view to debug DHCP Client configuration.
Table 3-2 Displaying and debugging DHCP Client configuration
Display
information of DHCP client
Enable/disable
debugging
Operation
Operation
address allocation
DHCP client
Huawei Technologies Proprietary
Chapter 3 DHCP Client Configuration
ip address dhcp-alloc
undo ip address dhcp-alloc
Command
display dhcp client [ verbose ]
[ undo ] debugging dhcp client { all | error |
event | packet }
3-3
Command