Huawei Quidway S5600 Series Operation Manual page 905

Operation Manual – FTP and TFTP
Quidway S5600 Series Ethernet Switches-Release 1510
II. Network diagram
Switch Switch
Figure 1-3 Network diagram for FTP configurations
III. Configuration procedure
1) Perform FTP server–related configurations on the PC, that is, create a user
account on the FTP server with user name "switch" and password "hello". (For
detailed configuration, refer to the configuration instruction relevant to the FTP
server software.)
2) Configure the switch.
# Log into the switch. (You can log into a switch through the Console port or by
Telneting to the switch. See the "Log into an Ethernet Switch" section for detailed
information.)
<Quidway>
Caution:
If available space on the Flash memory of the switch is not enough to hold the file to
be uploaded, you need to delete files from the Flash memory to make room for the file.
# Connect to the FTP server using the ftp command. You need to provide the IP
address of the FTP server, the user name and the password as well.
<Quidway> ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):switch
331 Give me your password, please
Password:*****
230 Logged in successfully
Network Network
Network Network
Huawei Technologies Proprietary
1-12
Chapter 1 FTP and TFTP Configuration
PC PC