Huawei Quidway S5600 Series Operation Manual page 456

Operation Manual – Multicast Protocol
Quidway S5600 Series Ethernet Switches-Release 1510
Operation
Enter
view
Enable
current interface
Configure router ports to
join a multicast group
Quit VLAN interface view.
Enter Ethernet port view
Configure router ports to
join a multicast group
6.2.5 Configuring IGMP Proxy
I. Configure IGMP Proxy
You can configure IGMP proxy to reduce the workload of configuration and
management of leaf networks without affecting the multicast connections of the leaf
network.
After the configuration of IGMP Proxy on the Layer 3 switch of the leaf network, the leaf
Layer 3 switch is just a host for the external network. Only when the Layer 3 switch has
directly connected members, can it receive the multicast data of corresponding groups.
Table 6-6 Configure IGMP Proxy
Enter system view
Enable
routing protocol
Enter
(which is connected to the
external network) view
Enable the IGMP protocol
Configure IGMP Proxy
VLAN interface interface Vlan-interface
interface-number
IGMP on the
igmp enable
igmp
group-address
interface-list
quit
interface
interface-number
igmp
group-address
vlan-id
Operation
system-view
the multicast
multicast routing-enable
VLAN interface
interface
interface-number
igmp enable
igmp
interface-number
Huawei Technologies Proprietary
Command
host-join
port
interface-type
host-join
vlan
Command
Vlan-interface
proxy Vlan-interface
6-12
Chapter 6 IGMP Configuration
Description
—
Required
IGMP is disabled on the
interface by default.
Optional
By default, the router port
does not join in any
multicast group.
—
—
Optional
By default, the router port
does not join in any
multicast group.
Description
—
Required
—
Required
Required