Huawei Quidway S5600 Series Operation Manual page 644

Operation Manual - DHCP
Quidway S5600 Series Ethernet Switches-Release 1510
2.3.1 Configuration Overview
An interface address pool is created when the interface is assigned a valid unicast IP
address and you execute the dhcp select interface command in interface view. The
IP addresses contained in it belong to the network segment where the interface
resides in and are available to the interface only.
You can perform certain configurations for DHCP address pools of an interface or
multiple interfaces within specified interface ranges. Configuring for multiple interfaces
eases configuration work load and makes you to configure in a more convenient way.
Table 2-11 Overview of interface address pool-based DHCP server configuration
Configuration task
Enable DHCP
Configure to assign the IP
addresses
interface-based address pools
to DHCP clients
Configure
to assign IP
addresses
of interface
DHCP
address
pool
DHCP
clients
Configure DNS service for the
DHCP server
Configure NetBIOS service for
the DHCP server
Customize DHCP service
of the local
Configure to
bind IP address
statically to
DHCP clients
Configure to
assign IP
to
addresses
dynamically
Huawei Technologies Proprietary
Chapter 2 DHCP Server Configuration
Remarks
Required
Required
One among these
two options is
required. These two
options can be
configured at the
same time.
Optional
Optional
Optional
2-14
Section
2.3.2 "Enabling DHCP"
2.3.3 "Configuring to
Assign the IP Addresses
of Interface Address Pools
to DHCP Clients"
2.3.4 "Configuring to
Assign IP Addresses of
DHCP Address Pools to
DHCP Clients"
2.3.5 "Configuring DNS
Services for the DHCP
Server"
2.3.6 "Configuring
NetBIOS Services
DHCP Clients"
2.3.7 "Customizing
DHCP Service"
for