Operation Manual – VRRP
Quidway S5600 Series Ethernet Switches-Release 1510
Configure
group-related parameters
VRRP backup group interface
tracking configuration
VRRP
configuration
1.2.2 Configuring a Virtual Router IP address
Table 1-3 lists the operations to configure a virtual router IP address (suppose you have
correctly configured the relation between the port and VLAN):
Table 1-3 Configure a virtual router IP address
Operation
Enter system view
Configure that the
virtual IP address
can be pinged
Map
router IP address
to a MAC address
Create a VLAN
Quit to system view
Enter
interface view
Configure a virtual
router IP address
Configuration
backup
auto
detect
system-view
vrrp ping-enable
the
virtual
vrrp method { real-mac |
virtual-mac }
vlan vlan-id
quit
VLAN
interface
vlan-id
vrrp
virtual-ip virtual-ip-address
Huawei Technologies Proprietary
Description
Required
Optional
Optional
Command
Vlan-interface
vrid
virtual-router-id
1-7
Chapter 1 VRRP Configuration
Related section
Section
1.2.3
"Configuring Backup
Group-Related
Parameters"
Section
"Configuring the Port
Tracking Function"
Section
1.2.5
"Configuring the Auto
Detect Function for
VRRP"
Description
—
Optional
By default, the virtual IP
address cannot be pinged.
Optional
By default, the virtual IP
address of a backup group is
mapped to a virtual router IP
address.
—
This operation creates the
VLAN to which the backup
group
corresponds.
vlan-id argument is the ID of
the VLAN.
—
—
Optional
1.2.4
The