Huawei Quidway S5600 Series Operation Manual page 283

Operation Manual – MSTP
Quidway S5600 Series Ethernet Switches-Release 1510
# Add port GigabitEthernet0/1 to VLAN 10.
[Quidway] vlan 10
[Quidway-Vlan10] port GigabitEthernet 0/1
3) Configure Switch C.
# Enable MSTP.
<Quidway> system-view
[Quidway] stp enable
# Enable the BPDU Tunnel function.
[Quidway] vlan-vpn tunnel
# Add port GigabitEthernet1/0/1 to VLAN 10.
[Quidway] vlan 10
[Quidway-Vlan10] port GigabitEthernet 1/0/1
[Quidway-Vlan10] quit
# Disable STP on port GigabitEthernet1/0/1 and then enable the VLAN-VPN function
on it.
[Quidway] interface GigabitEthernet 1/0/1
[Quidway-GigabitEthernet1/0/1] port access vlan 10
[Quidway-GigabitEthernet1/0/1] stp disable
[Quidway-GigabitEthernet1/0/1] vlan-vpn enable
[Quidway-GigabitEthernet1/0/1] quit
# Configure port Ethternet1/0/2 as a trunk port.
[Quidway] interface GigabitEthernet 1/0/2
[Quidway-GigabitEthernet1/0/2] port link-type trunk
# Add the trunk port to all VLANs.
[Quidway-GigabitEthernet1/0/2] port trunk permit vlan all
4) Configure Switch D.
# Enable MSTP.
<Quidway> system-view
[Quidway] stp enable
# Enable the BPDU Tunnel function.
[Quidway] vlan-vpn tunnel
# Add port GigabitEthernet1/0/2 to VLAN 10.
[Quidway] vlan 10
[Quidway-Vlan10] port GigabitEthernet 1/0/2
# Disable STP on port GigabitEthernet1/0/2 and then enable the VLAN-VPN function
on it.
[Quidway] interface GigabitEthernet 1/0/2
Huawei Technologies Proprietary
1-47
Chapter 1 MSTP Configuration