Huawei Quidway S5600 Series Operation Manual page 396

Operation Manual – Routing Protocol
Quidway S5600 Series Ethernet Switches-Release 1510
Operation
Set next
address for routing
information
Set local preference
of BGP
information
Set the
routing information
Set route cost type
for
information
Set route source of
BGP
information
Set the tag field of
routing information
Note:
A route-policy comprises multiple nodes. The relationship among the nodes in a
route-policy is "OR". As a result, the system examines the nodes in sequence, and
once the route passes a node in the route-policy, it will pass the matching test of the
route-policy without entering the test of the next node.
During the matching, the relationship among the if-match statements for a
route-policy node is "AND". That is, a matching test against a node is successful
only when all the matching conditions specified by the if-match statements in the
node are satisfied.
If no if-match statements are specified, all the routes will filter through the node.
A node can comprise no if-match clause or multiple if-match statements.
Each node comprises a set of if-match and apply statements. if-match statements
define matching rules. apply statements specify the actions performed after a
matching test against the node is successful, and the actions can be the attribute
settings of routing information.
hop IP
apply ip next-hop ip-address
apply
routing
local-preference
cost of
apply cost value
apply cost-type
routing
external ]
apply origin { igp | egp as-number |
routing
incomplete }
apply tag value
Huawei Technologies Proprietary
6-6
Chapter 6 IP Routing Policy Configuration
Command
local-preference
[ internal
Description
Optional
Optional
Optional
By default, no
action is defined to
set the routing cost
of routing
information.
|
Optional
Optional
Optional
By default, no
action is defined to
set the tag field of
OSPF routing
information.