Displaying And Maintaining Mac Address Table Configuration - Huawei Quidway S5600 Series Operation Manual

Hide thumbs Also See for Quidway S5600 Series:
Table of Contents

Advertisement

Operation Manual – MAC Address Table
Quidway S5600 Series Ethernet Switches-Release 1510
Normally, you are recommended to use the default aging time, namely, 300 seconds.
The no-aging keyword specifies that MAC address entries do not age out.
1.2.4 Setting the Maximum Number of MAC Addresses a Port Can Learn
The MAC address learning mechanism enables an Ethernet switch to acquire the
MAC addresses of the network devices on the segment connected to the ports of the
switch. The switch directly forwards the packets destined for these MAC addresses. A
MAC address table too big in size may decrease the forwarding performance of the
switch.
By setting the maximum number of MAC addresses that can be learnt from individual
ports, you can control the number of the MAC address entries the MAC address table
can dynamically maintains. When the number of the MAC address entries learnt from
a port reaches the set value, the port stops learning MAC addresses.
Table 1-6 Set the maximum number of MAC addresses a port can learn
Operation
Enter system view
Enter Ethernet port
view
Set the maximum
number of MAC
addresses the port
can learn
1.3 Displaying and Maintaining MAC Address Table
Configuration
To verify your configuration, you can display information about the MAC address table
by executing the display command in any view.
Table 1-7 Display and maintain MAC address table configuration
Display information about the
MAC address table
Display the aging time of the
dynamic MAC address entries
in the MAC address table
Command
system-view
interface
interface-number
mac-address
max-mac-count count
Operation
Huawei Technologies Proprietary
interface-type
Required
By default, the number of the
MAC addresses a port can
learn is not limited.
Command
display mac-address
[ display-option ]
display mac-address
aging-time
1-6
Chapter 1
MAC Address Table
Management
Description
Description
The display command
can be executed in any
view.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents