Vlan Configuration - Huawei Quidway S5600 Series Operation Manual

Operation Manual – VLAN
Quidway S5600 Series Ethernet Switches-Release 1510
Chapter 2 VLAN Configuration

2.1 VLAN Configuration

2.1.1 Basic VLAN Configuration
Table 2-1 Basic VLAN configuration
Operation
Enter system view
Create
VLANs
Create a VLAN and
enter VLAN view
Assign a name for
the current VLAN
Specify
description string of
the current VLAN
Caution:
When you use the vlan command to create VLANs, if the destination VLAN is an
existing dynamic VLAN, it will be transformed into a static VLAN and the switch will
output the prompt information.
2.1.2 Basic VLAN Interface Configuration
I. Configuration prerequisites
Create a VLAN before configuring a VLAN interface.
Command
system-view
multiple
vlan { vlan-id1 to vlan-id2 | all }
vlan vlan-id
name text
the
description text
Huawei Technologies Proprietary
2-1
Chapter 2 VLAN Configuration
Description
—
Optional
Required
The vlan-id argument
ranges from 1 to 4,094.
Optional
By default, the name of a
VLAN is its VLAN ID.
Optional
By default, the description
string of a VLAN is its
VLAN ID.