Huawei Quidway S5600 Series Operation Manual page 51

Operation Manual – Login
Quidway S5600 Series Ethernet Switches-Release 1510
2.5.2 Configuration Example
I. Network requirements
Assume that you are a level 3 VTY user and want to perform the following configuration
for users logging in through the Console port:
Authenticate users logging in through the Console port using the local password.
Set the local password to 123456 (in plain text).
The commands of level 2 are available to users logging into the AUX user
interface.
The baud rate of the Console port is 19,200 bps.
The screen can contain up to 30 lines.
The history command buffer can store up to 20 commands.
The timeout time of the AUX user interface is 6 minutes.
II. Network diagram
Figure 2-6 Network diagram for AUX user interface configuration (with the
authentication mode being password)
III. Configuration procedure
# Enter system view.
<Quidway> system-view
# Enter AUX user interface view.
[Quidway] user-interface aux 0
# Specify to authenticate users logging in through the Console port using the local
password.
[Quidway-ui-aux0] authentication-mode password
# Set the local password to 123456 (in plain text).
Huawei Technologies Proprietary
2-11
Chapter 2 Logging in through the Console Port