Poe Profile Configuration Example - Huawei Quidway S5600 Series Operation Manual

Operation Manual – PoE & PoE Profile
Quidway S5600 Series Ethernet Switches-Release 1510

2.4 PoE profile Configuration Example

I. Network requirements
GigabitEthernent1/0/1 through GigabitEthernet1/0/10 of the S5648P-PWR switch are
used by users of group A who have the following requirements:
All ports in use can enable PoE function;
Signal cables are used to supply power;
The PoE priority for GigabitEthernet1/0/1 through GigabitEthernet1/0/5 is Critical,
whereas The PoE priority for GigabitEthernet1/0/6 through GigabitEthernet1/0/10
is High.
The maximum power for GigabitEthernet1/0/1 through GigabitEthernet1/0/5 ports
is 3000mW, whereas the maximum power for GigabitEthernet1/0/6 through
GigabitEthernet1/0/10 is 15,400mW.
Based on the above requirements, two PoE profiles are made for users of group A.
Apply PoE profile1 for GigabitEthernet1/0/1 through GigabitEthernet 1/0/5;
Apply PoE profile2 for GigabitEthernet1/0/6 through GigabitEthernet 1/0/10.
GE1/0/1~GE1/0/5 GE1/0/1~GE1/0/5
IP Phone IP Phone
IP Phone IP Phone
IP Phone IP Phone
IP Phone IP Phone
Figure 2-1 PoE profile application
S5648P-PWR S5648P-PWR
GE1/0/6~GE1/0/10 GE1/0/6~GE1/0/10
Huawei Technologies Proprietary
2-4
Chapter 2 PoE Profile Configuration
Network Network
AP AP
AP AP
AP AP
AP AP