Huawei Quidway S5600 Series Operation Manual page 158

Operation Manual – GVRP
Quidway S5600 Series Ethernet Switches-Release 1510
1.4.2 Network diagram
Switch A Switch A Switch A Switch A
Figure 1-2 Network diagram for GVRP configuratio
1.4.3 Configuration procedure
Configure switch A.
# Enable GVRP globally.
<Quidway> system-view
[Quidway] gvrp
GVRP is enabled globally.
# Configure port GigabitEthernet1/0/1 to be a trunk port and to permit the packets of all
the VLANs.
[Quidway] interface GigabitEthernet1/0/1
[Quidway-GigabitEthernet1/0/1] port link-type trunk
[Quidway-GigabitEthernet1/0/1] port trunk permit vlan all
# Enable GVRP on the trunk port.
[Quidway-GigabitEthernet1/0/1] gvrp
GVRP is enabled on port GigabitEthernet1/0/1.
Configure switch B.
# Enable GVRP globally.
<Quidway> system-view
[Quidway] gvrp
GVRP is enabled globally.
# Configure port GigabitEthernet1/0/2 to be a trunk port and to permit the packets of all
the VLANs.
[Quidway] interface GigabitEthernet1/0/2
[Quidway-GigabitEthernet1/0/2] port link-type trunk
[Quidway-GigabitEthernet1/0/2] port trunk permit vlan all
# Enable GVRP on the trunk port.
[Quidway-GigabitEthernet1/0/2] gvrp
GVRP is enabled on port GigabitEthernet1/0/2.
GE1/0/1 GE1/0/1
GE GE 1/0/2 1/0/2
Switch B Switch B Switch B Switch B
Huawei Technologies Proprietary
1-7
Chapter 1 GVRP Configuration
n