Displaying Vlan Configuration - Huawei Quidway S5600 Series Operation Manual

Operation Manual – VLAN
Quidway S5600 Series Ethernet Switches-Release 1510
II. Configuration procedure
Table 2-2 Basic VLAN interface configuration
Operation
Enter system view
Create
interface and enter
VLAN
view
Specify
description
for the
VLAN interface
Disable the VLAN
interface
Enable the VLAN
Interface
Note that the operation of enabling/disabling a VLAN interface does not influence the
enabling/disabling states of the Ethernet ports belonging to this VLAN.
By default, a VLAN interface is enabled. In this scenario, a VLAN interface's status is
determined by the status of its Ethernet ports, that is, if all the Ethernet ports of the
VLAN interface are down, the VLAN interface is down (disabled); if one or more
Ethernet ports of the VLAN interface are up, the VLAN interface is up (enabled).
If a VLAN interface is disabled, its status is not determined by the status of its Ethernet
ports.

2.1.3 Displaying VLAN Configuration

After the configuration above, you can execute the display command in any view to
display the running status after the configuration, so as to verify the configuration.
Table 2-3 Display VLAN configuration
Operation
Display
VLAN interface
information
Display
VLAN
information
Command
system-view
a VLAN
interface
interface vlan-id
the
string
description text
current
shutdown
undo shutdown
Command
the
display interface Vlan-interface
[ vlan-id ]
the
display vlan [ vlan-id [ to vlan-id ] |
all | dynamic | static ]
Huawei Technologies Proprietary
—
Required
Vlan-interface
The vlan-id argument ranges
from 1 to 4,094.
Optional
By default, the description
string of a VLAN interface is
the
interface
Optional
Optional
2-2
Chapter 2 VLAN Configuration
Description
name of this VLAN
Description
You can execute
display command in any
view.
the