Huawei Quidway S5600 Series Operation Manual page 819

Operation Manual – SNMP and RMON
Quidway S5600 Series Ethernet Switches-Release 1510
Trap
packets
Set Trap target host
address
Set the source address
to send Trap packets
Set the
queue length of Trap
packet
destination host
Set aging time for Trap
packets
1.4 Setting the Logging Function for Network Management
Table 1-5 Set the logging function for network management
Operation
Enter system view
Set the
function for network
management
Operation
Enable the
port or
interface to enable snmp trap updown
send Trap
packets
Quit to
quit
system view
snmp-agent
address udp-domain { ip-address }
[ udp-port port-number ] params
securityname security-string [ v1 |
v2c | v3 {authentication | privacy } ]
snmp-agent
interface-type interface-number
information
snmp-agent trap queue-size size
sent to
snmp-agent trap life seconds
system-view
logging snmp-agent
{
get-operation | all }
Huawei Technologies Proprietary
Command
target-host
trap
Command
log
set-operation |
1-7
Chapter 1 SNMP Configuration
Description
trap
Required
source
Optional
Optional
The
value is 100.
Optional
The
aging time for
Trap packets is
120 seconds.
Description
—
Optional;
By default, the
function for SNMP is disabled.
default
default
logging