Locking User Interfaces; Displaying System Status Messages; Displaying System Configuration - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration

4.3.4 Locking User Interfaces

You can enter the set password to unlock the locked user interface.
Context
When you leave the operation terminals for a moment, you can lock the user interface to prevent
unauthorized users from operating the interface.
Do as follows on the switch:
Procedure
Step 1 Run:
lock
The user interface is locked.
Step 2 Follow the system prompt and input an unlock password, and then confirm.
<Quidway> lock
Enter Password:
Confirm Password:
If the locking is successful, the system prompts that the user interface is locked.
You must enter a correct password to unlock the user interface.
----End

4.4 Displaying System Status Messages

This section describes the display commands that are used for displaying basic system
configurations.
Context
You can use the display commands to collect information about the system status. The display
commands are classified according to the following functions:
l
l
l
l
See the related sections for display commands for protocols and interfaces. The following only
shows the system display commands.
Run the following commands in any view.

4.4.1 Displaying System Configuration

You can view information about the system version, system time, original configuration, and
current configuration.
Issue 01 (2011-07-15)
Displays system configurations.
Displays the running status of the system.
Displays the diagnostic information about a system.
Displays the restart information about the main control board.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Basic Configuration
43