Huawei Quidway S5600 Series Operation Manual page 331

Operation Manual – Routing Protocol
Quidway S5600 Series Ethernet Switches-Release 1510
Operation
Set OSPF route priority
4.6.6 Configuring the Maximum Number of OSPF Equal-Cost Routes
Table 4-12 Configure the maximum number of OSPF equal-cost routes
Enter system view
Enter OSPF view
Configure the maximum
number
equal-cost routes
4.6.7 Configuring OSPF to Import External Routes
Table 4-13 Configure OSPF to import external routes
Enter system view
Enter OSPF view
Enable OSPF to import
routes of other protocols
Enable
advertised routes
Enable OSPF to import the
default route
preference [ ase ] value
Operation
system-view
ospf
[ router-id router-id ] ]
multi-path-number
of OSPF
value
Operation
system-view
ospf
[ router-id router-id ] ]
import-route
[ cost value | type value |
tag value | route-policy
route-policy-name ]*
filter-policy { acl-number
OSPF to filter |
ip-prefix-name } export
[ routing-protocol ]
default-route-advertise
[ always | cost value |
type
route-policy
route-policy-name ]*
Huawei Technologies Proprietary
Command
Command
[ process-id
Command
[ process-id
protocol
ip-prefix
type-value |
4-18
Chapter 4 OSPF Configuration
Description
Optional
By default, the OSPF
route priority is 10 and the
priority of OSPF ASE is
150.
Description
—
—
Optional
Description
—
—
Required
By default, OSPF does
not import the routing
information of other
protocols.
Optional
By default, OSPF does
not filter advertised
routes.
Optional
By default, OSPF does
not import the default
route.