Huawei Quidway S5600 Series Operation Manual page 591

Operation Manual – VRRP
Quidway S5600 Series Ethernet Switches-Release 1510
Table 1-5 Configure the VRRP backup group port tracking function
Operation
Enter system view
Create a VLAN
Add an Ethernet
port to the VLAN
Quit to system view
Enter Ethernet port
view
Enable
tracking function
Note:
The port to be tracked can be in the VLAN which the VLAN interface of the backup
group belongs to.
1.2.5 Configuring the Auto Detect Function for VRRP
Note:
You need to create the detecting group and perform VRRP-related configurations
before the following operations. Refer to Auto Detect module of this manual for the
creation of a detecting group.
Table 1-6 Configure the auto detect function for VRRP
Operation
Enter system view
Enter
interface view
Command
system-view
vlan vlan-id
port
interface-number
quit
interface
interface-number
vrrp vlan-interface vlan-id
the port
vrid virtual-router-id track
[ reduced value-reduced ]
Command
system-view
VLAN interface
vlan-id
Huawei Technologies Proprietary
—
Required
By default, vlan 1 is the
default vlan.
interface-type
—
Quit the VLAN view to system
view
interface-type
—
Required
By default, the value by which
the priority of an Ethernet port
is decreased is 10.
—
Vlan-interface
—
1-9
Chapter 1 VRRP Configuration
Description
Description