Displaying Ssh Configuration - Huawei Quidway S5600 Series Operation Manual

Operation Manual - SSH Terminal Services
Quidway S5600 Series Ethernet Switches-Release 1510
Note:
In the initial authentication, if the SSH client does not have the public key for the server
which it accesses for the first time, the client continues to access the server and save
locally the public key of the server. Then at the next access, the client can authenticate
the server through the public key saved locally.
II. Speciying source IP address for sending traffic packets
The following configurations specify source IP address or source interface for SSHv2.0
Client and have enhanced the traffic manageability.
Table 1-10 Specify source IP address for sending traffic packets
Enter system view
Specify
address
Client.
Specify source interface
for SSHv2.0 Client

1.1.4 Displaying SSH Configuration

Use the display commands in any view to view the running of SSH and further to check
the configuration result. Through the displaying information, you can verify the
configuration effect.
Table 1-11 Display SSH configuration
Display host and server
public keys
Display client RSA public
key
Display SSH status and
session information
Display
information
Operation
system-view
source IP
for SSHv2.0
ssh2 source-ip ip-address
ssh2 source-interface interface-type
interface-number
Operation
SSH user
Huawei Technologies Proprietary
Command
Command
display
local-key-pair public
display
peer-public-key [ brief |
name keyname ]
display ssh server
{ status | session }
display
user-information
[ username ]
1-11
Chapter 1 SSH Terminal Services
Description
—
Optional
Optional
Description
rsa display command can be
executed in any view
rsa
ssh