Huawei Quidway S5600 Series Operation Manual page 752

Operation Manual – Mirroring
Quidway S5600 Series Ethernet Switches-Release 1510
Note:
If you specify the destination port and source port in Ethernet port view without creating
a port mirroring group, the mirroring group 1 will be created automatically.
Table 1-6 Configure port mirroring in Ethernet port view (2)
Operation
Enter system view
Create a port mirroring
group
Enter Ethernet port
view of the destination
port
Define the current port
as the destination port
Exit current view
Enter Ethernet port
view of the source port
Configure the source
port and specify the
direction
packets to be mirrored
Display
settings
mirroring
III. Configuring port mirroring in system view
Table 1-7 Configure port mirroring in system view
Operation
Enter system view
Create a port mirroring
group
Configure
destination port
Command
system-view
mirroring-group
local
interface
interface-number
mirroring-group
monitor-port
quit
interface
interface-number
mirroring-group
mirroring-port { both |
of the
inbound | outbound }
parameter
display
of the
{ all | local }
system-view
mirroring-group
local
the
mirroring-group
monitor-port monitor-port
Huawei Technologies Proprietary
Chapter 1 Mirroring Configuration
group-id
interface-type
group-id
interface-type
group-id
mirroring-group
Command
group-id
group-id
1-7
Description
—
Required
—
Required
LACP and TCP must be
disabled on the destination
port
—
—
Required
Required
This command can be
executed in any view.
Description
—
Required
Required
LACP and TCP must be
disabled on
destination port.
the