Chapter 1 Information Center Configuration Commands; Display Channel; Display Info-Center - Huawei Quidway S3900 series Command Manual

Command Manual – Information Center
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 Information Center Configuration
1.1 Information Center Configuration Commands

1.1.1 display channel

Syntax
display channel [ channel-number | channel-name ]
View
Any view
Parameter
channel-number: Channel number, ranging from 0 to 9, corresponding to the 10
channels of the system.
channel-name: Channel name, by default, the name of channel 0 to channel 9 is (in
turn) console, monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6,
channel7, channel8, channel9.
Description
Use the display channel command to display the settings of an information channel.
If no argument is specified, the settings of all channels are displayed.
Example
# Display the settings of information channel 0.
<Quidway> display channel 0
channel number:0, channel name:console
MODU_ID NAME
ffff0000 default

1.1.2 display info-center

Syntax
display info-center [ unit unit-id ]
View
Any view
Commands
ENABLE LOG LEVEL
Y warning
Huawei Technologies Proprietary
1-1
Chapter 1 Information Center Configuration
ENABLE TRAP LEVEL
Y debugging
Commands
ENABLE DEBUG LEVEL
Y debugging