Huawei Quidway S5600 Series Operation Manual page 889

Operation Manual - File System Management
Quidway S5100-EI Series Ethernet Switches
Figure 2-1 Clockwise rotating of the seven-segment digital LED
Table 2-1 Upload file from an FTP client to the switch acting as FTP server
Device
FTP
server
(S5600)
FTP client
II. Enabling FTP client on the switch
After FTP client is enabled on an S5600 switch, the seven-segment digital LED on the
front panel of the switch will rotate clockwise when the FTP client (the S5600 switch) is
downloading file from a FTP server, and will stop rotating when the file downloading is
finished, as show in Figure 2-1.
Operation Command
Enable FTP ftp
server enable
Add a local
local-user
user and enter
user-name
local user view
password
Set a
{
password for
cipher
the local user
password
Set the local-user
password password-displ
display mode ay-mode { auto
of local users | cipher-force }
Log into the
remote FTP —
server
Upload file
from the FTP
—
client to the
FTP server
Huawei Technologies Proprietary
2-2
Chapter 2 FTP/TFTP Lighting Configuration
Required
sever
By default,
disabled.
Required
simple |
Required
}
Optional
By default, this mode is auto (that
is, the switch displays user
passwords in the modes adopted
when the passwords are set).
Required
For detailed configuration, refer to
the configuration
relevant to FTP client.
Required
For detailed configuration, refer to
the configuration
relevant to FTP client.
Description
FTP server
instruction
instruction
is