Configuring Redirect - Huawei Quidway S5600 Series Operation Manual

Operation Manual - QoS&QoS Profile
Quidway S5600 Series Ethernet Switches
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] acl number 2000
[Quidway-acl-basic-2000] rule permit source 10.1.1.1 0.0.0.255
[Quidway-acl-basic-2000] quit
[Quidway] interface GigabitEthernet1/0/1
[Quidway-GigabitEthernet1/0/1] traffic-limit inbound ip-group 2000 100 exceed
remark-dscp 56

1.9 Configuring Redirect

Refer to 1.1.10 Redirect for the introduction to redirect.
1.9.1 Configuration Prerequisites
ACL rules used for traffic identifying are defined. Refer to the ACL module in the
book for defining ACL rules
The port that the packets matching with the configurations rules are redirected to is
specified
The ports that needs this configuration are specified
1.9.2 Configuration Procedure
Table 1-13 Configure redirect
Operation
Enter system view
Enter Ethernet port
view
Configure redirect
Display the parameter
configurations
redirect
Display all the QoS
settings of the port
acl-rule: Applied ACL rules which can be the combination of various ACL rules. The
way of combination is described in Table 1-9.
Command
system-view
interface interface-type
interface-number
traffic-redirect
acl-rule { cpu | interface
interface-type
interface-number }
display qos-interface
{ interface-type
of
interface-number | unit-id }
traffic-redirect
display qos-interface
{ interface-type
interface-number | unit-id }
all
Huawei Technologies Proprietary
1-19
Chapter 1 QoS Configuration
Description
—
—
inbound
Required
Optional
You can
display command in any
view
execute the