Huawei Quidway S5600 Series Operation Manual page 116

Operation Manual – VLAN
Quidway S5600 Series Ethernet Switches-Release 1510
II. Configuration procedure
Table 2-6 Associate a port with the protocol-based VLAN
Operation
Enter system view
Enter port view
Associate a port
with
protocol-based
VLAN
Caution:
For the operation of adding a port to the VLAN in the untag way, refer to the section
"Port Basic Configuration" in this manual.
2.3.3 Displaying Protocol-Based VLAN Configuration
After the configuration above, you can execute the display command in any view to
display the running status, so as to verify the configuration.
Table 2-7 Display VLAN configuration
Operation
Display
information
the protocol-based
VLAN
Display the protocol
information
protocol
configured on the
specified VLAN
Display the protocol
information
protocol
configured on the
specified port
Command
system-view
interface
interface-number
port hybrid protocol-vlan
the
vlan vlan-id { protocol-index
[ to protocol-end ] | all }
the
about display vlan [ vlan-id [ to vlan-id ] |
all | static | dynamic ]
and
display
indexes
{ vlan-id [ to vlan-id ] | all }
display protocol-vlan interface
and
{ interface-type interface-number
indexes
[ to
interface-number ] | all }
Huawei Technologies Proprietary
2-6
—
interface-type
Required
Required
Command
protocol-vlan vlan
interface-type
Chapter 2 VLAN Configuration
Description
Description
You cam execute the
display command in
any view