Huawei Quidway S5600 Series Operation Manual page 641

Operation Manual - DHCP
Quidway S5600 Series Ethernet Switches-Release 1510
M-node. Nodes of this type are p-nodes mixed with broadcasting features (The
character m stands for the word mixed), that is to say, this type of nodes obtain
mappings by sending broadcast packets first. If they fail to obtain mappings, they
send unicast packets to the WINS server to obtain mappings.
H-node. Nodes of this type are b-nodes mixed with peer-to-peer features. (The
character h stands for the word hybrid), that is to say, this type of nodes obtain
mappings by sending unicast packets to WINS servers. If they fail to obtain
mappings, they send broadcast packets to obtain mappings.
Table 2-7 Configure NetBIOS services for the DHCP server
Operation
Enter system view
Create
address pool and
enter
address pool view
Configure
server
for DHCP clients
Configure
clients to be of a
specific
node type
2.2.7 Customizing DHCP Service
With the evolution of DHCP, new options are constantly coming into being. You can
add the new options as the properties of DHCP servers by performing the following
configuration.
Table 2-8 Customize DHCP service
Operation
Enter system view
system-view
a DHCP
dhcp
DHCP pool-name
WINS
addresses nbns-list ip-address&<1-8>
DHCP
netbios-type { b-node |
NetBIOS h-node | m-node | p-node }
system-view
Huawei Technologies Proprietary
Chapter 2 DHCP Server Configuration
Command
server ip-pool
Command
2-11
Description
—
Required
By default, no global DHCP
address pool is created
Required
By default, no WINS server
address is configured
Optional
By default, no NetBIOS node
type of the DHCP client is
specified and a DHCP client
uses an h-node
Description
—