Huawei Quidway S5600 Series Operation Manual page 438

Operation Manual – Multicast Protocol
Quidway S5600 Series Ethernet Switches-Release 1510
Caution:
The other multicast configurations do not take effect until multicast is enabled.
3.2.2 Configure Suppression on the Multicast Source Port
I. Configure suppression on the multicast source port in system view
Table 3-3 Configure suppression on the multicast source port in system view
Operation
Enter
view
Configure
suppression on
the multicast
source port
II. Configure suppression on the multicast source port in Ethernet port view
Table 3-4 Configure suppression on the multicast source port in Ethernet port view
Operation
Enter system view
Enter Ethernet port view
Configure suppression on
the multicast source port
in Ethernet port view
3.2.3 Clear the Related Multicast Entries
Use the reset command in user view to clear the related statistics information about the
common multicast configuration.
Command
system
system-view
multicast-source-de
ny [
interface-list ]
system-view
interface
interface-number
multicast-source-deny
Huawei Technologies Proprietary
Chapter 3 Common Multicast Configuration
—
Required
The suppression on the multicast
interface
source port feature is disabled by
default.
Command
interface-type
3-3
Description
Description
—
—
Optional
The suppression on the
multicast source
feature is disabled on all
ports of the switch by
default.
port