Displaying And Maintaining Msdp Configuration - Huawei Quidway S5600 Series Operation Manual

Operation Manual – Multicast Protocol
Quidway S5600 Series Ethernet Switches-Release 1510

8.5 Displaying and Maintaining MSDP Configuration

I. Displaying and debugging MSDP configuration
After the above-mentioned configuration, you can use the display command in any
view to view the MSDP running information, so as to verify configuration result.
In the user view, you can execute the reset command to reset the MSDP counter.
Table 8-12 Display and debug MSDP configuration
Operation
Display
information of MSDP
peer state
Display
information of MSDP
peer status
Display the (S, G) state
learned
peers
Display the number of
sources and groups in
the MSDP cache
Reset
connection
specified MSDP peer
Clear the cached SA
messages
Clear
information
specified MSDP peer
without resetting the
MSDP peer
II. Tracing the transmission path of an SA message over the network
You can use the msdp-tracert command in any view to trace the path along which the
multicast data travels from the multicast source to the destination receiver over the
network, so as to locate errors, if any.
the brief
display msdp brief
the detailed
display
[ peer-address ]
display
[
from MSDP
[
[autonomous-system-number ]
display
[autonomous-system-number ]
the TCP
reset
with the
peer-address
reset
[ group-address ]
the statistics
of the
reset
[ peer-address ]
Huawei Technologies Proprietary
Command
msdp peer-status
msdp sa-cache
group-address
source-address ]
msdp sa-count
msdp peer
msdp sa-cache
msdp statistics
8-16
Chapter 8 MSDP Configuration
Description
|
]
You can execute the
display command in
any view.