Huawei Quidway S5600 Series Operation Manual page 634

Operation Manual - DHCP
Quidway S5600 Series Ethernet Switches-Release 1510
2.2 Global Address Pool-Based DHCP Server Configuration
2.2.1 Configuration Overview
Table 2-1 Configure global address pool-based DHCP server
Enable DHCP
Configure global address pool mode
on interface(s)
Configure the
interface(s) to
operate
global
address pool
mode
Configure DNS services for the
DHCP server
Configure NetBIOS services for the
DHCP server
Customize DHCP service
Configure the gateway IP address
for DHCP clients
Configure the connection between
the DHCP global address pool and
the BIMS server
Configuration task
Configure to bind IP
address statically to
a DHCP client
in
Configure to assign
IP addresses
dynamically
Huawei Technologies Proprietary
Chapter 2 DHCP Server Configuration
Remarks
Required
Optional
One among
these two
options is
required. Only
one mode can
be selected for
the same
global address
pool.
Optional
Optional
Optional
Optional
Optional
2-4
Section
2.2.2 "Enabling DHCP"
2.2.3 "Configuring Global
Address Pool Mode on
Interface(s)"
2.2.4 "Configuring How
to Assign IP Addresses in
a Global Address Pool"
2.2.5 "Configuring DNS
Services for the DHCP "
2.2.6 "Configuring
NetBIOS Services for the
DHCP Server"
2.2.7 "Customizing
DHCP Service"
2.2.8 "Configuring
Gateway Addresses
DHCP Clients"
2.2.9 "Configuring
Connection Between
DHCP Global Address
Pool and a BIMS Server"
for
a