Common User Interface Configuration - Huawei Quidway S5600 Series Operation Manual

Operation Manual – Login
Quidway S5600 Series Ethernet Switches-Release 1510
2) A relative user interface index can be obtained by appending a number to the
identifier of a user interface type. It is generated by user interface type. The
relative user interface indexes are as follows:
AUX user interface: AUX 0
VTY user interfaces: VTY 0, VTY 1, VTY 2, and so on.

1.2.3 Common User Interface Configuration

Table 1-2 Common user interface configuration
Operation
Lock the current
user interface
Specify
messages
user
specified
interface
Disconnect
specified
interface
Enter system view
Enter
interface view
Set the command
that
automatically
executed when a
user logs into the
user interface
Display
information about
the current user
interface/all
interfaces
Display
physical attributes
and configuration
of the
specified
interface
lock
to send
to all
send { all | number | type
interfaces/a
number }
user
a
free user-interface [ type ]
user
number
system-view
user user-interface
first-number [ last-number ]
is
auto-execute
text
the
display users [ all ]
user
the
display
current/a [ type number | number ]
user
Huawei Technologies Proprietary
Chapter 1 Logging into an Ethernet Switch
Command
[ type ]
command
user-interface
1-2
Description
Optional
Execute this command in user
view.
A user interface is not locked
by default.
Optional
Execute this command in user
view.
Optional
Execute this command in user
view.
—
—
Optional
By default, no command is
automatically executed when
a user logs into a user
interface.
Optional
These two commands can be
executed in any view.