Displaying Rmon - Huawei Quidway S5600 Series Operation Manual

Operation Manual – SNMP and RMON
Quidway S5600 Series Ethernet Switches-Release 1510
Operation
Add an event entry
Add an alarm entry
Add an extended
alarm entry
Enter Ethernet port
view
Add a history entry
Add a
entry
Note:
The rmon alarm and rmon prialarm commands take effect on existing nodes only.
For each port, only one RMON statistics entry can be created. That is, if an RMON
statistics entry is already created for a given port, creation of another entry with a
different index for the same port will not succeed.

2.3 Displaying RMON

After the above configuration, you can execute the display command in any view to
display the RMON running status, and verify the effect of the configuration.
rmon event
[ description string ] { log | trap
trap-community
log-trapcommunity | none }
[ owner text ]
rmon alarm
alarm-variable
{ delta
rising-threshold
threshold-value1
falling-threshold
threshold-value2
[ owner text ]
rmon prialarm entry-number
prialarm-formula
sampling-timer
absolute
rising_threshold
threshold-value1
falling_threshold
threshold-value2
entrytype { forever | cycle
cycle-period } [ owner text ]
interface
interface-number
rmon history
buckets
sampling-interval [ owner text ]
statistics rmon statistics entry-number
[ owner text ]
Huawei Technologies Proprietary
Command
event-entry
| log-trap
entry-number
sampling-time
| absolute }
event-entry1
event-entry2
prialarm-des
{ delta |
| changeratio }
event-entry1
event-entry2
interface-type
entry-number
number interval
2-4
Chapter 2 RMON Configuration
Description
Optional
Optional
Before adding an alarm
entry, you need to use the
rmon event command to
define the
referenced by the alarm
entry.
Optional
Before adding
extended alarm entry, you
need to use the rmon
event command to define
the event referenced by
the extended alarm entry.
—
Optional
Optional
event
an