Console Port Login Configuration With Authentication Mode Being Password - Huawei Quidway S5600 Series Operation Manual

Operation Manual – Login
Quidway S5600 Series Ethernet Switches-Release 1510
2.5 Console Port Login Configuration with Authentication
Mode Being Password
2.5.1 Configuration Procedure
Table 2-6 Console port login configuration with the authentication mode being
password
Operation
Enter system view
Enter
interface view
Configure
authenticate
using
password
Set
password
Configur
e the
Console
port
Configure
command
available
logging into the user
interface
Make
services available to
the user interface
Command
system-view
AUX user user-interface
aux 0
to
users authentication-m
the local ode password
set
authentication
the local
password
{ cipher | simple }
password
Set the speed
baud rate speed-value
Set the parity { even |
check
mark | none |
mode odd | space }
Set the stopbits { 1 | 1.5 |
stop bits 2 }
Set the
databits { 7 | 8 }
data bits
the
level
user
to users
level level
terminal
shell
Huawei Technologies Proprietary
Chapter 2 Logging in through the Console Port
—
—
Required
By default, users logging into a switch
through the Console port are not
authenticated; while those logging in
through
authenticated.
Required
Optional
The default baud rate of an AUX port
(also the Console port) is 9,600 bps.
Optional
By default, the check mode of a
Console port is set to none, that is, no
check bit.
Optional
The default stop bits of a Console port
is 1.
Optional
The default data bits of a Console port
is 8.
Optional
privilege
By default, commands of level 3 are
available to users logging into the
AUX user interface.
Optional
By default, terminal services are
available in all user interfaces.
2-9
Description
Modems or Telnet are