Huawei Quidway S5600 Series Operation Manual page 660

Operation Manual - DHCP
Quidway S5600 Series Ethernet Switches-Release 1510
Note:
Perform the operations listed in Table 2-24 in system view if you specify to assign
IP addresses of an interface-based address pool to DHCP clients.
This method allows you to configure the option 184 supporting function for multiple
interfaces.
II. Configuring the option 184 supporting function in interface view
Table 2-25 Configure the option 184 supporting function in interface view
Enter system view
Enter interface view
Configure an IP address for the
interface
Configure
operate in DHCP server mode
and assign the IP addresses of
an interface-based
pool to DHCP clients
Configure
sub-option
Configure the AS-IP sub-option
Configure
configuration sub-option
Configure the Fail-over routing
sub-option
Operation
the interface to
address
the NCP-IP
the voice VLAN
Huawei Technologies Proprietary
Chapter 2 DHCP Server Configuration
Command
system-view
interface interface-type
interface-number
ip address ip-address
net-mask
dhcp select interface
dhcp server voice-config
ncp-ip ip-address
dhcp server voice-config
as-ip ip-address
dhcp server voice-config
voice-vlan vlan-id { enable |
disable }
dhcp server voice-config
fail-over ip-address
dialer-string
2-30
Description
—
—
—
Required
Required
Optional
Optional
Optional