Huawei Quidway S5600 Series Operation Manual page 97

Operation Manual – Login
Quidway S5600 Series Ethernet Switches-Release 1510
You need to perform the following two operations to control Web users by source IP
addresses.
Defining an ACL
Applying the ACL to control Web users
8.4.1 Prerequisites
The controlling policy against Web users is determined, including the source IP
addresses to be controlled and the controlling actions (permitting or denying).
8.4.2 Controlling Web Users by Source IP Addresses
Controlling Web users by source IP addresses is achieved by applying basic ACLs,
which are numbered from 2000 to 2999.
Table 8-6 Control Web users by source IP addresses
Operation
Enter system view
Create a basic ACL
or enter basic ACL
view
Define rules for the
ACL
Quit to
view
Apply the ACL to
control Web users
8.4.3 Disconnecting a Web User by Force
The administrator can disconnect a Web user by force using the related command.
Table 8-7 Disconnect a Web user by force
Operation
Disconnect a Web
user by force
Command
system-view
acl number
[ match-order { config |
auto } ]
rule [ rule-id ] { permit |
deny } [ source { sour-addr
sour-wildcard | any } ]
[ time-range time-name ]
[ fragment ]
system
quit
ip http acl acl-number
Command
free web-users
user-id userid | user-name
username }
Huawei Technologies Proprietary
8-8
—
As for
acl-number
command,
keyword
default.
Required
—
Optional
Required
{ all |
Execute this command in user
view.
Chapter 8 User Control
Description
the acl number
the config
is specified by
Description